Where We Run · 60618
North Center
Family kitchens that cook every single night. Igniters, valve stems and oven door hinges get more cycles here in a year than the same parts see anywhere else on the route.
What a visit here usually involves
Highest duty cycle on the route, and it shows in exactly the parts you would expect: igniters, valve stems and oven door hinges. Where there is a second oven in the kitchen, both get a probe on the shelf while we are there, whichever one prompted the call — coming back a fortnight later for a fault that was already measurable is a waste of your morning and ours.
- Appliances on this run
- Family-sized ranges cooked on daily, plus a separate wall oven in many kitchens
- Access
- Level entries and driveways — most appointments can be held early
- Booking
- 8:00 am – 8:00 pm, seven days. Dispatch answered 24/7.
What we are called out for
- Range Repair Dual-fuel and all-gas professional ranges taken as one appliance rather than two: burner and griddle behaviour on the top, ignition and gas pressure underneath, and the oven cavity below it all diagnosed on the same visit.
- Oven Repair Built-in wall ovens and the oven half of a range — calibration drift measured against a probe rather than the display, convection faults, door and hinge work, and control boards that have locked themselves out.
- Cooktop & Rangetop Repair Sealed-burner rangetops, gas cooktops and induction tops — spark modules, burner heads and orifices, valve stems that have gone stiff, and glass tops where a zone has stopped responding.
- Range Hood Repair Professional hoods, liners and inserts — blower motors and speed controls, baffle and duct restriction, lighting circuits, and the make-up air problems that show up in a tight rehabbed kitchen long before the hood itself is at fault.
Also on this loop: Logan Square, Wicker Park, Portage Park.
What people say afterwards
5 out of 5 · 1604 reviews
Loud as a jet and pulling almost nothing, which is the worst combination. Blower wheel was caked and out of balance. He cleaned and rebalanced it instead of selling me a whole new blower.
Cressida E. · North Center
Grease had made it well past the baffles and into the run. He cleaned back as far as the elbow, photographed it so I could see, and explained how often it needs doing at the way we cook.
Theodora S. · North Center
Turning any knob set every position sparking at once. He explained the module handles all of them together, swapped it, then ran each burner in turn with me standing there to confirm.
Sabine T. · North Center
Both cavities ran cool and I had been compensating with the dial for two years. He measured the real temperature at three points, replaced a sensor, and now the number on the front means something.
Wanda K. · North Center
A spill had run under the panel years ago and one knob had seized solid. He took the valve out, cleaned and regreased it, and it turns as smoothly as the others do now.
Perpetua L. · North Center
It locked itself with a fault code the night before a family dinner. He read the stored history the next morning, found an intermittent latch, and replaced the assembly rather than resetting it.
Zofia N. · North Center
Booking a visit in North Center
Give dispatch the model off the frame, the fault and the address. You get a window that can be kept, and a firm price once the readings are taken.
$89 service call, credited against the repair · On site 8:00 am – 8:00 pm, seven days
